周期性的或伴有贯穿流的西边界流跨隙流动的迟滞变异过程     

宋新新  袁东亮  王铮 《海洋学报(英文版)》2019,38(4):90-96

使用1.5层准地转约化重力模式研究了周期性的或伴有贯穿流的西边界流跨隙流动的迟滞变异过程。当西边界流变化的周期比罗斯贝波在缺口处调整的时间尺度大得多时，在雷诺数增加和减少过程的霍夫分叉点都发生延迟，从而产生新的雷诺数迟滞区间；并且西边界流流态转变的临界值变化显著；且周期强迫越短，雷诺数迟滞区间越大。当西边界流变化的周期与罗斯贝波在缺口处调整的时间尺度相当时，西边界流在缺口的流态呈无迟滞的周期性变化，且西边界流入侵西海盆的程度随周期减少而变小。此外，当贯穿流的流量大于西边界流的一半时，会显著影响西边界流在缺口处的迟滞变异过程；西边界流向西入侵程度和流态转变发生的临界雷诺值均发生变化，且贯穿流流量越大变化越大。  相似文献   

番红砗磲外套膜色素提取条件优化及成分分析     

付正祎  刘二田  顾志峰  石耀华  王爱民  吴川良  刘春胜 《海洋科学》2019,43(6):71-77

以番红砗磲(Tridacna crocea)为实验对象,通过单因素对比实验对其外套膜色素的提取条件进行了优化,并利用薄层层析色谱法对色素组成进行了初步分析。结果表明:丙酮和乙醇为适宜的番红砗磲外套膜色素提取剂;使用丙酮为提取剂时,浸提时间为4 h,提取温度为25℃,料液比为1︰40。使用乙醇为提取剂时,浸提时间为4 h,提取温度为30℃,料液比为1︰200;利用薄层色谱法分离外套膜颜色为蓝色和红棕色的番红砗磲外套膜色素后发现,蓝色番红砗磲外套膜色素由9种色素组分构成,红棕色个体番红砗磲外套膜色素由10种色素组分构成。  相似文献   

尼日尔三角洲东部深水区构造特征及其形成机理     

赵江  王秋良  卢圣力  付博  杜峰 《大地测量与地球动力学》2019,39(7):691-695

研究尼日尔三角洲东部深水区块发现，整个盆地从陆向洋具有3个大的构造分区：伸展拉张区、过渡区和挤压逆冲区。伸展区以大型同沉积断层伴生大量滚动背斜构造为特征，过渡区发育大量泥底辟构造，挤压区以复杂的逆冲叠瓦构造为主。通过分析形成机理，揭示东部深水转换带上M研究区构造特征，按构造的演化特征将该区构造分为泥底辟型、冲断-泥底辟混合型、逆冲型3种类型，提出研究区内的圈闭主要以构造-岩性圈闭为主，为尼日尔三角洲盆地深水勘探提供新的理论指导。  相似文献   

Dynamic loading tests and seismic response analysis of a stud-type damper composed of multiple friction units with disc springs     

Takeshi Sano  Kazutaka Shirai  Yasumasa Suzui  Yoshikazu Utsumi 《地震工程与结构动力学》2020,49(13):1259-1280

This paper presents an experimental study on the performance of a shear-sliding stud-type damper composed of multiple friction units with high-tension bolts and disc springs. A numerical evaluation of the response reduction effects achieved by the stud-type damper is also presented. In dynamic loading tests, the behavior of stud-type multiunit friction damper specimens was investigated. Three different full-scale damper specimens, which were composed of five, six, or seven friction units with two or four sliding surfaces, were incorporated into loading devices for testing. The stud-type friction dampers demonstrated stable rigid-plastic hysteresis loops without any remarkable decrease in the sliding force even when subjected to repetitive loading, in addition to showing no unstable behavior such as lateral buckling. The damper produced a total sliding force approximately proportional to the number of sliding surfaces and friction units. The total sliding force of the stud-type damper can thus be estimated by summing the contributions of each friction unit. In an earthquake response simulation, the control effects achieved by stud-type dampers incorporated into an analytical high-rise building model under various input waves, including long-period, long-duration and pulse-like ground motions, were evaluated. A satisfactory response reduction was obtained by installing the developed stud-type dampers into the main frame without negatively impacting usability and convenience in terms of building planning.  相似文献   

Accuracy assessment of NLCD 2011 percent impervious cover for selected USA metropolitan areas     

《International Journal of Applied Earth Observation and Geoinformation》2020

The emergence of high-resolution land cover data has created the opportunity to assess the accuracy of impervious cover (IC) provided by the National Land Cover Database (NLCD). We assessed the accuracy of the 900 m² NLCD2011 %IC for 18 metropolitan areas throughout the conterminous United States using reference data from 1 m² land cover data developed as part of the United States Environmental Protection Agency’s EnviroAtlas project. Agreement was assessed from two perspectives: 1) sensitivity to the size of the assessment unit used for the comparison, and 2) utility of NLCD %IC to serve as a proxy for high-resolution IC. The former perspective was considered because statistical relationships can be sensitive to assessment unit size and shape, and the latter perspective was considered because high resolution (reference) %IC data are not available nationwide. The utility of NLCD %IC as a proxy for the high resolution data was assessed for seven lattice (square) cell sizes ranging from 1 ha to 200 ha using four EnviroAtlas IC indicators: 1) %IC per 100 ha (1 km²); 2) %IC by Census block group; 3) %IC within a 15 m (radius) of the riparian zone, and; 4) %IC within a 50 m (radius) of the riparian zone. Agreement was quantified as per assessment unit deviation (NLCD %IC – reference %IC) and summarized as Mean Absolute Deviation (MAD) and Mean Deviation (MD) both within and across the 18 metropolitan areas. Ordinary least squares (OLS) regression (y = reference %IC and x = NLCD %IC) was also used to evaluate the quality of the NLCD %IC data. MAD was ≤ 5% for six of the seven lattice cell sizes. MAD was also ≤ 5% for Census block groups > 100 ha and for both riparian units. These results suggest that uncertainty attributable to the measurement of %IC was no greater than the uncertainty related to the effect of IC on aquatic resources that have been derived from studies of aquatic condition (e.g., benthic fauna) over a range of %IC. Overall, agreement was variable from one metropolitan area to the next. Agreement improved as assessment unit size increased and declined as the level of urbanization (NLCD %IC) increased. NLCD %IC tended to underestimate reference %IC overall, but NLCD %IC was sometimes greater than reference %IC in urbanized settings.  相似文献   

Lidar-aided analysis of boreal forest backscatter at Ku band     

《International Journal of Applied Earth Observation and Geoinformation》2020

This paper analyzes the backscatter of the microwave signal in a boreal forest environment based on a Ku -band airborne Frequency-Modulated Continuous Waveform (FMCW) profiling radar—Tomoradar. We selected a half-managed boreal forest in the southern part of Finland for a field test. By decomposing the waveform collected by the Tomoradar, the vertical canopy structure was achieved. Based on the amplitude of the waveform, the Backscattered Energy Ratio of Canopy-to-Total (BERCT) was calculated. Meanwhile, the canopy fraction was derived from the corresponding point cloud recorded by a Velodyne VLP-16 LiDAR mounted on the same platform. Lidar-derived canopy fraction was obtained by counting the number of the first/ the strongest returns versus the total amount of returns. Qualitative and quantitative analysis of radar-derived BERCT on lidar-derived canopy fraction and canopy height are investigated. A fitted model is derived to describe the Ku-band microwave backscatter in the boreal forest to numerically analyze the proportion contributed by four factors: lidar-derived canopy fraction, radar-derived canopy height, the radar-derived distance between trees and radar sensor and other factors, from co-polarization Tomoradar measurements. The Root Mean Squared Error (RMSE) of the proposed model was 0.0958, and the coefficient of determination R2 was 0.912. The fitted model reveals that the correlation coefficient between radar-derived BERCT and lidar-derived canopy fraction is 0.84, which illustrates that lidar surface reflection explains the majority of the profiling /waveform radar response. Thus, vertical canopy structure derived from lidar can be used for the benefit of radar analysis.  相似文献   

顾及地形起伏的无人机影像覆盖分析方法     

张衡  李骁  叶朋飞 《测绘通报》2020,(1):102-106

使用无人机实施测绘航空摄影时，由于无人机相对航高较低，地面起伏会对无人机影像的分辨率、覆盖范围、重叠度造成较大的影响，影像成果会出现分辨率不足、重叠度不够、覆盖漏洞等缺陷。针对这一情况，本文提出了一种利用数字微分正解法的计算方法，借助DEM准确计算每张影像的覆盖范围，并使用FME软件高效生成全部影像的覆盖范围。经过实际使用，验证了该方法可以在航线设计阶段准确预测并分析全部影像的覆盖范围、重叠度，因此可及时发现设计问题并调整航线。该方法可以有效减少因地形起伏造成的影像覆盖缺陷，减少返工现象，从整体上提高了作业效率。  相似文献   

低空无人机的倾斜摄影测量技术在城市轨道交通建设中的应用     

冯增文  李珂  李梓豪  任传斌 《测绘通报》2020,(9):42-45

智慧地铁的建设需要三维模型的支撑，运用倾斜摄影测量技术，结合三维可视化技术，为智慧地铁提供了三维数据支撑，推动了全生命周期智慧地铁建设的全面发展。本文旨在以雄安新区城市轨道交通R1线为研究区，对其沿线85 km进行了无人机航飞工作，通过数据处理获取了沿线三维实景模型，并对模型成果精度进行了详细对比。结果表明，此次倾斜摄影测量成果满足1：500比例尺要求。此外，还对倾斜摄影测量技术在城市轨道交通建设中的相关应用进行了介绍，为城市轨道交通建设工作由二维向三维转变开拓了新的方向。  相似文献   

复杂地形景区三维导览图的设计与实现     

吴思锴  李百寿  郭家豪  李雪  张卫平 《北京测绘》2020,(1):38-43

为满足复杂地形景区对三维地图导览的需求,构建更为清晰的三维地图模型,提供良好的三维导览地图设计方案显得尤为重要。为了更好地与卫星影像进行贴合,DEM数据的采样密度要与卫星影像的分辨率一致。本文通过对比当下常用的四种空间插值方法的适用范围与运用特点,设置相关阈值及权重,直观比较了四种插值方法产生的插值结果,选择更适合复杂景区DEM插值的插值方法并对其进行精度提升,以此得到符合精度要求的DEM数据。最后利用相应地区的卫星影像进行地图投影及影像贴图,两种数据结合构建复杂景区的三维地图模型,给游客带来更为精确直观的定位信息和空间要素信息。  相似文献   

基于倾斜摄影测量的大比例尺三维测图技术     

李通 《北京测绘》2020,(4):543-546

目前,城市大比例尺地形图更新主要采用全野外的测量方法,不仅耗费大量的劳动力,并且效率低下。旋翼机和倾斜摄影测量技术的快速发展,为城市大比例尺地形图的测绘与更新提供了全新的技术手段。本文以滕州市城区约10 km2的1∶500地形图测绘项目为例,采用大疆精灵4 Pro旋翼机进行数据获取,Smart 3D软件进行空三加密及三维建模,最后在EPS软件中进行三维测图,并对地形图成果进行了精度检核,验证了技术方案的可行性,为同类项目提供了有益参考。  相似文献